In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques which you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the home, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it is really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so that you get something which looks like a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.
Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can ensure that nothing will leak once you place the mask on. Make sure the edges are cut so the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you are done, so that you don’t end up with smudges or smears on your dog.
Then it’s time to paste the mask onto your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold gas mask for dog it over. Make sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged firmly onto the face of your dog. Don’t make the folds too big or else it could look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Make certain the ears are level and be certain it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you’re using a dog mask as your pet security, you will have to do some sanding to make certain it’s safe on your dog. You can accomplish it by sanding off any excess paper that may have been eliminated from your mask.